Robot Arm Can Gripper

€15.00
VAT excluded

Not fond of reaching out for your favorite beverage yourself? Then the solution is here for the uStepper Robot Arm Rev 4! A can gripper - which easily swaps with the standard grippers on the Robot Arm. It is designed for a regular soda/beer can with a neck diameter of ~53 mm and the top just around 55 mm.

Have a look at the assembly manual under the "Attachments" tab

You will get 2 x can gripper printed in the same quality as the uStepper Robot Arm Rev 4

*Dimensions are in mm

Quantity

214

Download

Can Gripper Instructions

Assembly instructions for uStepper Robot Arm Rev 4 Can Gripper

Download (1.23M)