• Quick view
    26,00 € Expected delivery in November 2018
    New

    Make sequences, play them, manually control uStepper S/S-lite or even do timelapse photography using a linear rail! 4 pushbuttons OLED display Presoldered display and uStepper connectors Optocoupler (optional) 2.5mm jack (optional) Cover (optional) Note: Read optocoupler disclaimer below

    26,00 €
    Expected delivery in November 2018
  • Quick view
    6,00 € Expected delivery in November 2018
    New

    uStepper S Prototype shield fitting right onto the uStepper S/S-lite board! Standard 2.54 mm hole spacing Access to all I/O and power pins Prepared for BT/Wifi module ! uStepper S prototype shield does not come with pins soldered!

    6,00 €
    Expected delivery in November 2018
  • Quick view
    5,00 € In Stock
    New

    Use an RJ-45 cable for drop-in replacement of stepsticks! Power over RJ-45 Signals over RJ-45 Two parts required (Stepstick Shield & uStepper Shield) - see drop-down menu to the right.

    5,00 €
    In Stock
  • Quick view
    175,00 € Expected delivery in November 2018
    New

    The new 4th generation uStepper Robot Arm ! In this kit you will get: Printed plastic parts* Nuts & bolts Bearings Belts & gears Gripper servo + cable Assembly manual *Printed in 0.2mm layer with 30% infill in PLA. Expect printed quality, not injection mold quality.

    175,00 €
    Expected delivery in November 2018
  • Quick view
    4,00 € In Stock
    New

    Micro USB cable suitable for uStepper boards. USB 2.0 Black 0.8 m Double shielded USB A plug to USB B Micro plug

    4,00 €
    In Stock
  • Quick view
    12,00 € In Stock
    New

    Power supply perfectly suited for uStepper boards with its 12 V 2 A supply capability. EU plug Input 90-264 VAC Output 12 VDC DC-jack 5.5/2.1mm Anti-overload, Anti-overvoltage, Short circuit protection

    12,00 €
    In Stock
  • Quick view
    55,00 € In Stock

    The Robot Arm Power and Connectivity Kit comes with: One uStepper Proto Shield BT-module Wires for soldering Jumper wires + servo extension Connectors for soldering 19V 4.7A PSU 100-240V input EU power cord DC-jack splitter

    55,00 €
    In Stock
  • Quick view
    5,00 € In Stock

    Use an RJ-45 cable for drop-in replacement of stepsticks! Power over RJ-45 Signals over RJ-45 Two parts required (Stepstick Shield & uStepper Shield) - see drop-down menu to the right.

    5,00 €
    In Stock
  • Quick view
    4,15 € In Stock

    uStepper Prototype shield fitting right onto the uStepper board! With pin connectors Hole for current adj. Potentiometer Hole for reset button

    4,15 €
    In Stock
  • Quick view
    155,00 € Expect 7 work days lead time

    The uStepper Robot Arm kit comes with everything you need to get started assembling your own uStepper Robot Arm!   The base kit comes with: 3D printed parts (see disclaimer for details) All necessary nuts and bolts Bearings and aluminium tubes 1 Micro servo for gripper Hex Keys and super glue for assembly See assembly instructions for specifications and...

    155,00 €
    Expect 7 work days lead time
  • Quick view
    7,00 € In Stock

    Cover for uStepper NEMA 17 motor Snaps on to the uStepper mountings using magnets Two versions available Open Cover - with holes for I/O pins Closed Cover - only holes for power and motor Quality is 3D printed, 25% infill and 0.2 mm layers.

    7,00 €
    In Stock
  • Quick view
    6,00 € In Stock

    The kit consists of the following: 6 M3 Philips screws 2 M3 nuts A 3D printed ABS bracket A centerring ring for the magnet   Motor and uStepper PCB is not included! Please read the stepper motor requirements below!

    6,00 €
    In Stock
  • Quick view
    5,25 € In Stock

    Mount your uStepper permanently with screws instead of the easy-mount bracket.  Fits the NEMA 17 motor sold on ustepper.com With 2 x M3x35 mm bolts Printed in ABS with 50% infill

    5,25 €
    In Stock
  • Quick view
    15,00 € In Stock

    uStepper compatible NEMA 17 motor Frame size 42 x 42mm - NEMA 17 Step angle: 1.8° Voltage rating: 2.55 V Current rating: 1.7 A Resistance: 1.5 Ω per coil Inductance 2.3 mH Holding torque: 4200 g⋅cm Number of leads: 4 Lead length: 10 cm Motor length : 40 mm Weight: 240 g

    15,00 €
    In Stock
  • Quick view
    5,00 € In Stock

    Use an RJ-45 cable for drop-in replacement of stepsticks! Power over RJ-45 Signals over RJ-45 Two parts required (Stepstick Shield & uStepper Shield) - see drop-down menu to the right.

    5,00 €
    In Stock
  • Quick view
    4,15 € In Stock

    uStepper Prototype shield fitting right onto the uStepper board! With pin connectors Hole for current adj. Potentiometer Hole for reset button

    4,15 €
    In Stock
  • Quick view
    7,00 € In Stock

    Cover for uStepper NEMA 17 motor Snaps on to the uStepper mountings using magnets Two versions available Open Cover - with holes for I/O pins Closed Cover - only holes for power and motor Quality is 3D printed, 25% infill and 0.2 mm layers.

    7,00 €
    In Stock
  • Quick view
    6,00 € In Stock

    The kit consists of the following: 6 M3 Philips screws 2 M3 nuts A 3D printed ABS bracket A centerring ring for the magnet   Motor and uStepper PCB is not included! Please read the stepper motor requirements below!

    6,00 €
    In Stock
  • Quick view
    55,00 € In Stock

    The Robot Arm Power and Connectivity Kit comes with: One uStepper Proto Shield BT-module Wires for soldering Jumper wires + servo extension Connectors for soldering 19V 4.7A PSU 100-240V input EU power cord DC-jack splitter

    55,00 €
    In Stock
  • Quick view
    26,00 € In Stock

    Make sequences, play them, manually control uStepper or even do timelapse photography using a linear rail! 4 pushbuttons OLED display Presoldered display and uStepper connectors Optocoupler (optional) 2.5mm jack (optional) Cover (optional) Note: Read optocoupler disclaimer below

    26,00 €
    In Stock
  • Quick view
    15,00 € In Stock

    uStepper compatible NEMA 17 motor Frame size 42 x 42mm - NEMA 17 Step angle: 1.8° Voltage rating: 2.55 V Current rating: 1.7 A Resistance: 1.5 Ω per coil Inductance 2.3 mH Holding torque: 4200 g⋅cm Number of leads: 4 Lead length: 10 cm Motor length : 40 mm Weight: 240 g

    15,00 €
    In Stock
  • Quick view
    63,00 € In Stock

    The uStepper Robot Arm Mech kit contains all nuts, bolts, bearings, aluminium tubes (in length specified in the assembly manual), micro servo, hex-keys and super glue - making it possible to assemble the uStepper Robot Arm with your own printed parts!

    63,00 €
    In Stock
  • Quick view
    5,25 € In Stock

    Mount your uStepper permanently with screws instead of the easy-mount bracket.  Fits the NEMA 17 motor sold on ustepper.com With 2 x M3x35 mm bolts Printed in ABS with 50% infill

    5,25 €
    In Stock
  • Quick view
    155,00 € In Stock

    The uStepper Robot Arm kit comes with everything you need to get started assembling your own uStepper Robot Arm!   The base kit comes with: 3D printed parts (see disclaimer for details) All necessary nuts and bolts Bearings and aluminium tubes 1 Micro servo for gripper Hex Keys and super glue for assembly See assembly instructions for specifications and...

    155,00 €
    In Stock